Qlogic 3200 Series User Manual - -Df
7–iSCSI Noninteractive Commands
-df
7-8
SN0054667-00 G
-df
To view the firmware properties, issue the -df command as follows:
-df <hba_port_inst>
QConvergeConsole CLI displays information about the adapter: model, serial
number, port number, iSCSI name, alias, IP address, instance number, and the
following firmware information:
Firmware information for instance
Firmware version
Firmware attribute
Firmware version 2
Firmware attribute 2
-dp
Use the -dp command to preinstall an adapter driver specified from a .zip
or .inf file. This operation may be performed without an adapter installed in the
system.
You can specify the following actions:
p — Preinstall driver package (default)
i — Install driver package
u — Uninstall driver package
g — Get driver package path
You may also specify the following flags:
DRIVER_PACKAGE_FORCE
DRIVER_PACKAGE_LEGACY_MODE
DRIVER_PACKAGE_ONLY_IF_DEVICE_PRESENT
DRIVER_PACKAGE_REPAIR
DRIVER_PACKAGE_SILENT
You may need to reboot the system following this command. For details about the
success or failure of the driver update operation, view the trace log file.
-dr
(Display Default Router List [IPv6])
The IPv6 default router list includes both the active default router and a short list
of other routers that advertised themselves as capable of acting as a default
router. The active default router always appears first in the list.
To view the default router list, issue the -dr command as follows:
-dr <hba_port_inst>