Qlogic 3200 Series User Manual - -Dspchap
7–iSCSI Noninteractive Commands
-dspchap (Display CHAP Table)
SN0054667-00 G
7-9
-dspchap
(Display CHAP Table)
To view the CHAP table, issue the -dspchap command as follows:
-dspchap <hba_port_inst>
-dtdsp
(Display Discovered Targets)
To view the discovered targets that are not persistent, issue the -dtdsp
command as follows:
-dtdsp <hba_port_inst>
-dtdspa
(List Targets)
To view discovered targets, including both persistent and nonpersistent, issue the
-dtdspa command as follows:
-dtdspa <hba_port_inst>
If the specified port instance has no targets assigned, the CLI returns an error.
-dtdupd
(Duplicate a Discovered Target)
To duplicate a discovered target that is not persistent, issue the -dtdupd
command as follows:
-dtupd <hba_port_inst> <target_instance>
To obtain the target instance, use the command
.
A duplicate target is assigned a new iSCSI initiator session ID (ISID) and can then
be used to create a redundant path.
-dtdupd
(Duplicate a Persistent Target)
To duplicate a discovered target that is persistent, issue the -dtdupd command
as follows:
-dtdupd <hba_port_inst> <target_ID>
A duplicate target is assigned a new iSCSI ISID and can then be used to create a
redundant path.
-dtli
(Login and Persist a Discovered Target)
To log in a specific discovered target, issue the -dtli command as follows:
-dtli <hba_port_inst> <target_instance>
To obtain the target instance, use the command
.