Qlogic 3200 Series User Manual - -V, -Ver
5–NIC Noninteractive Commands
-v, -ver (Display Program Version Information)
5-20
SN0054667-00 G
-v, -ver
(Display Program Version Information)
To view the version number of QConvergeConsole CLI, issue the -v or -ver
command as follows:
> qaucli -pr nic -v
> qaucli -pr nic -ver
For example:
> qaucli -pr nic -ver
Using config file: G:\Program Files\QLogic
Corporation\QConvergeConsoleCLI\qaucli.cfg
Installation directory: G:\Program Files\QLogic
Corporation\QConvergeConsoleCLI
Working dir: G:\Documents and Settings\user1
Using config file: G:\Program Files\QLogic
Corporation\QConvergeConsoleCLI\netscli.cfg
SANsurfer CNA Networking CLI
ncli version : 1.0.00.59
netSDMAPI : 01.01.05
Copyright 1999-2011 QLogic Corp.
-vlanadd
(Add VLAN to Port or Team)
To add a VLAN to a port or team, issue the -vlanadd command as follows:
> qaucli -pr nic -vlanadd <port_insts> <vlan_id>
Where port_insts specifies a list of comma-separated port indices (for
example, 1,2) and vlan_id specifies a numeric value 1–4095.
For example:
> qaucli -pr nic -vlanadd 2 120
Using config file: .\netscli.cfg
Loading: 1. CNA ...
Loading: 1. CNA Port index : 1 ...
Loading: 1. CNA Port index : 2 ...
VLAN List:
ListIndex: 1 CNA: 1 CNA Port: 1 VLAN ID: None MAC:
00:c0:dd:0a:b1:a8 Description: QLogic 10Gb PCI Ethernet Adapter -
Network Load Balancing Filter Device
ListIndex: 2 CNA: 1 CNA Port: 2 VLAN ID: None MAC:
00:c0:dd:0a:b1:a9 Description: QLogic 10Gb PCI Ethernet Adapter #2
- Network Load Balancing Filter Device
User entered ListIndices: 2
User entered VLAN ID: 120
About to set VLAN ID: 120 for ListIndex: 2
Successfully set.
NOTE
Virtual LAN (VLAN) is a Windows-specific feature. The following VLAN
commands run successfully only in a Windows environment.