Qlogic 3200 Series User Manual - page 370
11–Converged Network Adapter Interactive Commands
NIC Partitioning (NPAR) Configuration
11-136
SN0054667-00 G
3: Function: 4 MAC: 00:0E:1E:04:84:FA Type: iSCSI
4: Function: 6 MAC: 00:0E:1E:04:84:FB Type: NIC
5: View all PCI Functions Information
(p or 0: Previous Menu; m or 98: Main Menu; ex or 99: Quit)
Please Enter Selection: 1
General information
-------------------
Function Id : 0
Function Type : NIC
Minimum bandwidth () : 1
Maximum bandwidth () : 100
Physical Port Number : 1
MAC Address : 00:0E:1E:04:84:F8
NIC Partitioning (NPAR) Configuration
7. NIC Partitioning (NPAR) Configuration1. NPAR Configuration
From the main menu, select the NIC Partitioning (NPAR) Configuration option.
Select the configuration type (NPAR Configuration) to open the NIC Partitioning
(NPAR) Configuration menu with options to configure bandwidth and to change
peripheral component interface (PCI) function personality (see the
for a
definition of personality). For example:
NIC Partitioning (NPAR) Configuration Selection
1: NPAR Configuration
2: ESwitch
Configuration
(p or 0: Previous Menu; m or 98: Main Menu; ex or 99: Quit)
Please Enter Selection: 1
NIC Partitioning (NPAR) Configuration
1: Bandwidth Configuration
2: Change PCI Function Personality
NOTE
SR-IOV and NPAR cannot be enabled at the same time. If SR-IOV is
enabled on the host, all NPAR-related commands are disabled.