Qlogic 3200 Series User Manual - -Pa
6–Fibre Channel Noninteractive Commands
-pa (Adapter Port Alias [FCoE Configuration])
6-32
SN0054667-00 G
Where:
To unbind all targets on a specific adapter port or on all adapter ports, issue the
following command:
# qaucli -pr fc -p (<hba instance> | <hba wwpn> | all) (remove all
| unbind all)
Where:
-pa
(Adapter Port Alias [FCoE Configuration])
Use the -pa command to:
Define the port alias for a specific adapter port
Delete the port alias from a specific adapter port
View the port alias for a specific adapter port
To define a port alias for the specified adapter, issue the following command:
# qaucli -pr fc -pa (<hba instance> | <hba wwpn>) <alias>
Where:
To delete a port alias for the specified adapter port, issue the following command:
# qaucli -pr fc -pa (<hba instance> | <hba wwpn>) delete
To view a port alias for the specified adapter port, issue the following command:
# qaucli -pr fc -pa (<hba instance> | <hba wwpn>) view | info
hba instance = Adapter number (use the -g command to find)
hba wwpn = World wide port name of the adapter
target wwnn = World wide node name of the target
hba instance = Adapter number (use the -g command to find)
hba wwpn = World wide port name of the adapter
hba instance = Adapter number (use the -g command to find)
hba wwpn = World wide port name of the adapter
alias = Symbolic name you assign to the adapter port