Qlogic 3200 Series User Manual - Converged Network
SN0054667-00 G
11-1
11
Converged Network
Adapter Interactive
Commands
This chapter describes the interactive mode command line options for Converged
Network Adapters. The interactive mode uses a series of menus from which you
select the option you want by typing the number for that option.
For information on noninteractive mode operation—in which you simply type a
short code to perform operations on the adapter—refer to the following chapters
for the corresponding adapter function:
Chapter
Chapter
6 Fibre Channel Noninteractive Commands
Chapter
7 iSCSI Noninteractive Commands
Chapter
8 NIC Partitioning (NPAR) Noninteractive Commands
This chapter uses a “breadcrumbs” line following most section headings that
shows how to access that option; that is, it shows the hierarchical path from the
top level to the command under discussion. For example, to reach the Flash
Update option for Converged Network Adapters from the Main Menu, select
option 3 to choose Adapter Updates, 1 to select the Converged Network
Adapter type,and then 1 to see the Flash Update option. The following shows
the breadcrumbs example:
3. Adapter Updates1. Converged Network Adapter1. Flash Update
The Main Menu contains the following options:
Main Menu
1: Adapter Information (see
)
2: Adapter Configuration (see
)
3: Adapter Updates (see
)
4: Adapter Diagnostics (see
)
5: Adapter Statistics (see
)
6: NIC Partitioning (NPAR) Information (see
)