Qlogic 3200 Series User Manual - page 364
11–Converged Network Adapter Interactive Commands
Display FCoE Port Link Status
11-130
SN0054667-00 G
CNA Model : QLE8242
CNA Desc. : QLE8242 QLogic Pci Express to 10GbE Dual Channel CNA (FCoE)
FW Version :
WWPN : 21-00-00-0E-1E-04-95-EB
WWNN : 20-00-00-0E-1E-04-95-EB
Link : Online
=======================================================
1: Display Test Parameters
2: Reset Test Parameters
3: Configure Test Parameters
4: Display Link Statistics
Display Test Parameters
5. Adapter Statistics1. Converged Network Adapter5. Display FCoE Port Link Status
Test Parameters
From the Link Statistics Menu, select the Display Test Parameters option to view
link status logging parameters. For example:
---------------------------------------
Link Status Settings
---------------------------------------
AutoPoll (AP): 10
SetRate (SR): 5
LogToFile (LF): N/A
Reset Test Parameters
5. Adapter Statistics1. Converged Network Adapter5. Display FCoE Port Link Status
Test Parameters
From the Link Statistics Menu, select the Reset Test Parameters option to reset
the link status logging parameters to their default values.
Configure Test Parameters (-ls)
5. Adapter Statistics1. Converged Network Adapter5. Display FCoE Port Link Status
Configure Test Parameters
From the Link Statistics Menu, select the Configure Test Parameters option to
open the Link Statistics submenu with options to specify the polling method, the
polling rate, and the name of the log file. For details about these parameters, see
. For example:
Configure Test Parameters Menu
=======================================================