Qlogic 3200 Series User Manual - Adapter Diagnostics
11–Converged Network Adapter Interactive Commands
Firmware Serdes Table Update (-sp)
11-104
SN0054667-00 G
Please Enter Selection: 1
Enter a file name or Hit
Firmware Serdes Table Update (-sp)
3. Adapter Updates1. Converged Network Adapter5. FW Serdes Table Update
=
From the CNA Adapter Update menu, select the FW Serdes Table Update option
to update the adapter firmware SerDes table. From the HBA selection menu,
select the adapter to be updated and then enter a firmware SerDes table file name
(.dat). For example:
QConvergeConsole
CLI - Version 1.0.3 (Build 9)
FW Serdes Table Update
1: CNA Model: QLE8362 SN: AFE1227F06201
Port 1 [Protocol(s): NIC FCoE]
Port 2 [Protocol(s): NIC FCoE]
(p or 0: Previous Menu; m or 98: Main Menu; ex or 99: Quit)
Please Enter Selection: 1
Enter a file name or Hit
Adapter Diagnostics
4. Adapter Diagnostics1. Converged Network Adapter
From the main menu, select the Adapter Diagnostics option, and then select the
adapter model (CNA Model). The Converged Network Adapter (CNA)
Diagnostics menu provides options to run tests on registers, hardware, Flash
memory, interrupts, links, ports, read/write buffers, and LEDs; run the transceiver
diagnostics monitoring interface (DMI); perform iSCSI adapter and port
diagnostics; and view the iSCSI port logs. For example:
CNA Adapter Information
1: CNA Model: QLE8242 SN: AFE1028C03899
Port 1 [Protocol(s): NIC FCoE iSCSI]
Port 2 [Protocol(s): NIC FCoE iSCSI]
(p or 0: Previous Menu; m or 98: Main Menu; ex or 99: Quit)
NOTE
This option is only for blades/mezzanine adapters.