Qlogic 3200 Series User Manual - page 328
11–Converged Network Adapter Interactive Commands
CNA NIC Configuration
11-94
SN0054667-00 G
…
3: Allow 802.3ad Team over CNA
…
13: Refresh
(p or 0: Previous Menu; m or 98: Main Menu; ex or 99: Quit)
Please Enter Selection: 3
Allow 802.3ad Team over CNA (on,off) [on]: off
Successfully configured the Team Settings...
Configure New Team (-teamnew)
2. Adapter Configuration1. CNA Configuration3. CNA NIC Configuration4. Team
Configuration4. Configure New Team
From the Configure Teams Menu, select the Configure New Team option to
configure a new team. For example:
Available Team Types:
1=Failsafe Team
2=Switch Independent Load Balancing
3=802.3ad Static Team
4=802.3ad Dynamic Team - Active LACP
5=802.3ad Dynamic Team - Passive LACP
Select Team Type [1]: 1
2. CNA: 1 CNA Port: 1 CNA Model: QLE8242
Mac Phys. Address: 00:0e:1e:04:95:e8 Loc. Mac: 00:0e:1e:04:95:e8
Description: QLogic Dual Port 10 Gigabit Ethernet CNA, PCIe 2.0 Adapter
User assigned name:
CNA Serial Number: AFE1028C03899 Active FW Ver. : 4.07.31 Adapter Alias:
Port 2
Port Alias: None
Link Status: Up
CNA Port: yes
IPv4 Address: 192.168.10.55
IPv6 Addresses: fe80::8177:b777:e679:daf0
Select one or more CNA Port Indices (2 or ALL) : 2
Do you want ot set primary? (yes, no) [yes]:
Member selected as Primary: QLogic Dual Port 10 Gigabit Ethernet CNA, PCIe 2.0
Adapter
Add Non-QLogic Ports as members? (yes, no) [no]:
Updating parameters ... Plese wait ...
User_Assigned_Name []: Team 2