Qlogic 3200 Series User Manual - Adapter Information
11–Converged Network Adapter Interactive Commands
Adapter Information
11-2
SN0054667-00 G
7: NIC Partitioning (NPAR) Configuration (see
)
8: NIC Partitioning (NPAR) Statistics (see
)
6: Refresh (see
7: Help (see
8: Exit (see
Please Enter Selection:
Adapter Information
1. Adapter Information1. Converged Network Adapter
From the main menu, select the Adapter Information option, and then select the
adapter type (Converged Network Adapter). The Converged Network Adapter
Information menu provides options for viewing information about the adapter,
ports, VPDs, VLANs, teaming, FCoE, iSCSI, and port targets or LUNs. For
example:
Adapter Type Selection
1: Converged Network Adapter
2: Fibre Channel Adapter
(p or 0: Previous Menu; m or 98: Main Menu; ex or 99: Quit)
Please Enter Selection: 1
Converged Network Adapter Information
1: CNA Adapter Information
2: CNA Port Information
3: CNA VPD Information
4: CNA VLAN Information
5: Teaming Information
6: CNA FCoE Information
7: CNA iSCSI Information
8: CNA Port Target/LUN Information
NOTE
For interactive commands that have an equivalent noninteractive command
line option, the noninteractive command is shown in parentheses following
the interactive command. For example, the CNA FCoE Information
command described in this chapter has an equivalent -cna command line
option described in the noninteractive command chapters.
Some interactive commands have no noninteractive menu command
equivalents.