Qlogic 3200 Series User Manual - page 302
11–Converged Network Adapter Interactive Commands
CNA iSCSI Configuration
11-68
SN0054667-00 G
Port iSCSI Name: iqn.2000-04.com.qlogic:isp8214.0 SFP not installed
(p or 0: Previous Menu; m or 98: Main Menu; ex or 99: Quit)
Please Enter Selection: 2
Target Configuration
=======================================================
CNA : 0 Port: 1
SN : AFE1028C03899
CNA Model : QLE8242
iSCSI Name : iqn.2000-04.com.qlogic:isp8214.000E1E0495EA.4
FW Version : 4.7.31
iSCSI MacAddr : 00:0E:1E:04:95:EA
IPv4 Address : 192.168.1.45
=======================================================
1: List Targets
2: Display Target Information
3: Bind Target
4: Delete Target
5: Configure Target Parameters
6: Add A Target
7: Disable a Target
8: Enable a Target
9: Configure Target Authentication Menu
10: Target Discovery Menu
11: List LUN information
12: Save Target/CHAP Changes
13: Refresh
List Targets (-dtdspa)
2. Adapter Configuration1. CNA Configuration2. CNA iSCSI Configuration4. Target
Configuration
From the Target Configuration menu, select the List Targets option to view a list
of target devices. For example:
------------------------------------------------------------------
Target ID: 3 hba_no: 1 IP: 192.168.1.11 Port: 3260 TGT
Instance #: 3
ISCSI Name: iqn.1992-04.com.emc:cx.apm00103600607.b2
Alias: 0607.b2