Qlogic 3200 Series User Manual - -Gcr
7–iSCSI Noninteractive Commands
-gcr
7-12
SN0054667-00 G
-gcr
To get crash record information for the specified adapter port, issue the -gcr
command as follows:
-gcr <hba_port_inst> <crash output file>
-h
(Help)
To view the QConvergeConsole CLI help file, issue the -h command as follows:
-h
For convenience, you can send the output to a file for easier viewing or printing as
follows:
qaucli -pr iscsi –h >file.txt
-i
Use the -i command to view a list of all detected adapter port instances (“ports”)
in the system. Each port instance (hba_port_inst) is identified by its number.
To view general adapter information, issue the -i command as follows:
-i [hba_port_inst]
When you use the hba_port_inst option, information for only that adapter
port instance is shown. When you do not use the hba_port_inst option,
information for all ports in the system is shown.
The following adapter (port) information is shown:
Item number (order in which ports were detected)
Adapter number, that is, the number of this adapter in the detection process
Adapter port number (0 or 1) for this adapter
Port instance number in the system (two-port adapters appear twice)
Port Instance on the adapter
Adapter model number (for example, QLA4010)
Adapter serial number (for example, TFC0105C51704)
Firmware version (for example, 3.0.1.45)
Connection medium
IP address (IP address of the adapter port instance)
iSCSI name (adapter port iSCSI name; the QLogic default name or one you
assign)
Alias (adapter port instance iSCSI alias name that you assign)