Qlogic 3200 Series User Manual - Drivers Update (-D)
11–Converged Network Adapter Interactive Commands
Drivers Update (-d)
SN0054667-00 G
11-103
Drivers Update (-d)
3. Adapter Updates1. Converged Network Adapter3. Drivers Update
From the CNA Adapter Update menu, select the Drivers Update option to update
drivers. From the port menu, select a port for which to update drivers, and then
type a file name. For example:
Drivers Update
CNA Model QLE8242 SN: AFE1028C03899
1. Port 1 [Protocol(s): NIC iSCSI FCoE]
MAC Address: 00:0E:1E:04:95:E8
WWPN: 21-00-00-0E-1E-04-95-EB
Port iSCSI Name: iqn.2000-04.com.qlogic:isp8214.0 Online
2. Port 2 [Protocol(s): NIC iSCSI FCoE]
MAC Address: 00:0E:1E:04:95:EC
WWPN: 21-00-00-0E-1E-04-95-EF
Port iSCSI Name: iqn.2000-04.com.qlogic:isp8214.0 SFP not installed
(p or 0: Previous Menu; m or 98: Main Menu; ex or 99: Quit)
Please Enter Selection: 2
Enter a file name or Hit
Firmware Preload Table Update (-u)
3. Adapter Updates1. Converged Network Adapter4. FW Preload Table Update
=
From the CNA Adapter Update menu, select the FW Preload Table Update
option to update the adapter firmware preload table. From the HBA selection
menu, select the adapter to be updated and then enter a firmware preload table
file name (.dat). For example:
QConvergeConsole
CLI - Version 1.0.3 (Build 9)
FW Preload Table Update
1: CNA Model: QLE8362 SN: AFE1227F06201
Port 1 [Protocol(s): NIC FCoE]
Port 2 [Protocol(s): NIC FCoE]
(p or 0: Previous Menu; m or 98: Main Menu; ex or 99: Quit)
NOTE
This option is only for blades/mezzanine adapters.