Qlogic 3200 Series User Manual - Iscsi Port Logs
11–Converged Network Adapter Interactive Commands
iSCSI Port Logs
11-120
SN0054667-00 G
Enter an IP Address:192.168.1.11
Enter the number of PING attempts to make:3
Enter the packet size in bytes for the PING [32]:
Ping to 192.168.1.11 successful (1 of 3).
Ping to 192.168.1.11 successful (2 of 3).
Ping to 192.168.1.11 successful (3 of 3).
Perform Read/Write Buffer Test
4. Adapter Diagnostics1. Converged Network Adapter11. iSCSI Port Diagnostics
Read/Write Buffer Test
From the iSCSI Port Diagnostics menu, select the Perform Read/Write Buffer
Test option to test the read write buffer. Specify the number of tests, the data
pattern, and the error handling. For example:
The Read/Write Buffer Diagnostics require that the adapter have
no outstanding I/O operations. Please make sure there is no active
I/O before starting the diagnostic.
Do you wish to proceed? y
Number of Read/Write tests to perform: 5
(1) 8 byte pattern of 0x55 (0101 0101)
(2) 8 byte pattern of 0x5A (0101 1010)
(3) 16 byte pattern of 0xAA (1010 1010)
(4) 16 byte pattern of 0xFF (1111 1111)
Data Pattern to use: 1
Stop on error[Y]? y
iSCSI Port Logs
4. Adapter Diagnostics1. Converged Network Adapter12. iSCSI Port Logs
From the Converged Network Adapter (CNA) Diagnostics menu, select the iSCSI
Port Logs option. From the port menu, select a port to open the iSCSI Port Logs
menu with options to view the address resolution protocol (ARP) table, view the
connection error log, export the connection error log, view the neighbor cache,
view the default router list, view the local prefix list, and refresh the adapter
information. For example:
Converged Network Adapter (CNA) Diagnostics
CNA Model QLE8242 SN: AFE1028C03899
1. Port 1 [Protocol(s): NIC iSCSI FCoE]
MAC Address: 00:0E:1E:04:95:E8
WWPN: 21-00-00-0E-1E-04-95-EB