Qlogic 3200 Series User Manual - Iscsi Noninteractive
SN0054667-00 G
7-1
7
iSCSI Noninteractive
Commands
This chapter describes the noninteractive iSCSI command format and parameters
of QConvergeConsole CLI for QLogic 8200 Series Converged Network Adapters.
Command Format
The noninteractive iSCSI command format is as follows:
qaucli -pr iscsi [optional parameters] <Command Option> [Command
Variable] | [Command Variable]
Where:
defines the command variables.
NOTE
To view help, issue the -h command.
< > = Parameters in angled brackets are required.
[ ] = Parameters in square brackets are optional.
| = OR operator.
Italicized text = Placeholder describing the command variable.
Table 7-1. Noninteractive Command Variables
Variable
Definition
hba_port_inst System port
target_ID Target ID
LUN ID Logical unit number (0–255)
CHAP Number Challenge handshake authentication protocol (CHAP) number