Qlogic 3200 Series User Manual - page 277
11–Converged Network Adapter Interactive Commands
CNA FCoE Configuration
SN0054667-00 G
11-43
Commit Changes
2. Adapter Configuration1. CNA Configuration1. CNA FCoE Configuration8. Driver
Parameters
From the Drive Settings Menu, select the Commit Changes option to save and
activate target binding changes. For example:
Warning:
You have requested to commit driver setting changes
of the adapter. All adapters dependant on the same
driver will be affected by the change.
Do you want to proceed with the operation?
1: Yes
2: No
Selective LUNs
2. Adapter Configuration1. CNA Configuration1. CNA FCoE Configuration9. Selective LUNs
From the Converged Network Adapter (CNA) FCoE Configuration menu, select
the Selective LUNs option to configure selective LUNs. From the port menu,
select a port to open the Selective LUNS Menu with options to view the LUN
configuration and configure LUNs. For example:
CNA Model QLE8242 SN: AFE1028C03899
1. Port 1 [Protocol(s): NIC iSCSI FCoE]
MAC Address: 00:0E:1E:04:95:E8
WWPN: 21-00-00-0E-1E-04-95-EB
Port iSCSI Name: iqn.2000-04.com.qlogic:isp8214.0 Online
2. Port 2 [Protocol(s): NIC iSCSI FCoE]
MAC Address: 00:0E:1E:04:95:EC
WWPN: 21-00-00-0E-1E-04-95-EF
Port iSCSI Name: iqn.2000-04.com.qlogic:isp8214.0 SFP not installed
(p or 0: Previous Menu; m or 98: Main Menu; ex or 99: Quit)
Please Enter Selection: 2
Selective LUNs Menu
=======================================================
CNA : 0 Port: 1
SN : AFE1028C03899
ENode MacAddr : 00:0E:1E:04:95:EB
CNA Model : QLE8242
CNA Desc. : QLE8242 QLogic Pci Express to 10GbE Dual Channel CNA (FCoE)
FW Version : 4.07.31