Qlogic 3200 Series User Manual - page 187
10–Fibre Channel Interactive Commands
HBA Parameters
SN0054667-00 G
10-9
1: Port 1: WWPN: 21-00-00-1B-32-17-F9-C4 online
2: Port 2: WWPN: 21-01-00-1B-32-37-F9-C4 Loop Down
(p or 0: Previous Menu; m or 98: Main Menu; ex or 99: Quit)
Please Enter Selection: 1
HBA Parameters Menu
=======================================================
HBA : 0 Port: 1
SN : GFC0718P57753
HBA Model : QLE2462
HBA Desc. : QLE2462 PCI Express to 4Gb FC Dual Channel
FW Version : 4.00.26
WWPN : 21-00-00-1B-32-17-F9-C4
WWNN : 20-00-00-1B-32-17-F9-C4
Link : online
=======================================================
1: Display HBA Parameters
2: Configure HBA Parameters
3: Restore Defaults
Display HBA Parameters (-c)
2. Adapter Configuration2. Fibre Channel Adapter1. HBA Parameters
Parameters
From the HBA Parameters Menu, select the Display HBA Parameters option to
view adapter parameters. For example:
------------------------------------------------------------------------------
HBA Instance 0: QLE2462 Port 1 WWPN 21-00-00-1B-32-17-F9-C4 PortID 00-00-00
------------------------------------------------------------------------------
Connection Options : 2 - Loop Preferred, Otherwise Point-to-Point
Data Rate : Auto
Frame Size : 2048
Hard Loop ID : 0
Loop Reset Delay (seconds) : 5
Enable Host HBA BIOS : Disabled
Enable Hard Loop ID : Disabled
Enable FC Tape Support : Enabled
Operation Mode : 0 - Interrupt for every I/O completion
Interrupt Delay Timer (100ms) : 0
Execution Throttle : 16