Qlogic 3200 Series User Manual - page 368
11–Converged Network Adapter Interactive Commands
NIC Partitioning (NPAR) Information
11-134
SN0054667-00 G
NIC Partitioning (NPAR) Information
6. NIC Partitioning (NPAR) Information
From the main menu, select the NIC Partitioning (NPAR) Information option to
open a menu with options to view NPAR adapter information and NPAR port
information. For example:
Select an NPAR Information Type
1: NPAR Adapter Information
2: NPAR Port Information
NPAR Adapter Information (-ainfo)
6. NIC Partitioning (NPAR) Information1. NPAR Adapter Information
Select the NPAR Adapter Information option, and then select the port for which
to view NPAR adapter information. Select a function from the NIC Partitioning
(NPAR) Information menu. For example:
NIC Partitioning (NPAR) Adapter Configuration Selection
1: CNA Model: QLE8242 SN: AFE1020C03263
Port 1
Function 2 [Protocol: NIC]
Function 4 [Protocol: iSCSI]
Function 6 [Protocol: NIC]
Port 2
Function 1 [Protocol: NIC]
Function 5 [Protocol: iSCSI]
Function 7 [Protocol: FCoE]
(p or 0: Previous Menu; m or 98: Main Menu; ex or 99: Quit)
Please Enter Selection: 1
NIC Partitioning (NPAR) Information
1: Function: 0 MAC: 00:0E:1E:04:84:F8 Type: NIC
2: Function: 1 MAC: 00:0E:1E:04:84:FC Type: NIC
3: Function: 2 MAC: 00:0E:1E:04:84:F9 Type: NIC
NOTE
SR-IOV and NPAR cannot be enabled at the same time. If SR-IOV is
enabled on the host, all NPAR-related commands are disabled.