Qlogic 3200 Series User Manual - -Ls
6–Fibre Channel Noninteractive Commands
-ls (Display Parameters [HBA Statistics])
6-24
SN0054667-00 G
To show the LUN information for a specific device for a specific adapter port, issue
the following command:
# qaucli -pr fc -l (<hba instance> | <hba wwpn>) (<target port id>
| <target wwpn>)
To show the LUN information for a specific LUN on a specific target device for a
specific adapter port instance, issue the following command:
# qaucli -pr fc -l (<hba instance> | <hba wwpn>) (<target port id>
| <target wwpn>) <lun id>
Where:
-ls
(Display Parameters [HBA Statistics])
To view the link status, issue the following command:
# qaucli -pr fc -ls
(
<hba instance> | <hba wwpn>) [(<param name> |
<param alias>) <param value>]
Where:
defines the link status parameter names, aliases, and values.
hba instance = Adapter number (use the -g command to find)
hba wwpn = World wide port name of the adapter
target port id = Port ID of the target
target wwpn = World wide port name of the target
lun id = ID of the LUN
hba instance = Adapter number (use the -g command to find)
hba wwpn = World wide port name of the adapter
param name = Name of the parameter (see
param alias = Alias of the parameter (see
param value = New value of the parameter (see
Table 6-8. Link Status Parameters
Description
Name
Alias
Value
Sets link-status retrieval period
AutoPoll
AP
0–256
a
cycles
a
When the AutoPoll parameter is 0, the link status is retrieved automatically until the user aborts the
operation. When the AutoPoll parameter is in the range of 1–256, the link status is retrieved for the
number of cycles specified by this value.
Sets link-status retrieval polling interval
PollRate
SR
5–30 seconds
Save link status to CSV log file
LogToFile
LF
Log file name