Qlogic 3200 Series User Manual - -Nc
7–iSCSI Noninteractive Commands
-nc (Display Neighbor Cache [IPv6])
SN0054667-00 G
7-17
-nc
(Display Neighbor Cache [IPv6])
To display the neighbor cache (IPv6 only), issue the -nc command as follows:
-nc <hba_port_inst>
-netconf
(Configure IPv6 Settings)
To configure the network settings, issue the -netconf command as follows:
-netconf <hba_port_inst> [-IP <IP address>] [-IPNM <subnet mask>]
[-IPGW <gateway IP address>]
Where:
iSCSI_Snack
ISNACK
on or off
iSCSI_Strict_Login
IS
on or off
TCP Options
TCP_Auto_Discovery
SLPADIS
on or off
TCP_DHCP
TCPDHCP
on or off
TCP_Nagle
TCPN
on or off
TCPMaxWindowSize
TCPMWS
1000h–FFFFh
TCP_Time_Stamp
TCPTMS
on or off
Miscellaneous Options
KeepAliveTO
KATO
0–65535
Large_Frames
LRGFRM
on or off
a
MaxBurstLen
MBL
0–65535
MaxOutstandingR2T
MOR2T
0–65535
a
Not for QLA4010
IP <IP address> = Set the IP address of the adapter
IPNM <subnet mask> = Set the subnet mask of the adapter
-IPGW <gateway address> = Set the gateway
-DISN4 = Disable IPv4 network setup
-IPv4DHCP = Set DHCP on
Table 7-3. Adapter Parameters (Continued)
Configuration Name
Configuration Alias
Value