Qlogic 3200 Series User Manual - -Testlink
5–NIC Noninteractive Commands
-testlink (Link Test)
SN0054667-00 G
5-19
-testlink
(Link Test)
To test the link, issue the -testlink command as follows:
> qaucli -pr nic -testlink [cna_port_inst]
-testregister
(Register Test)
To test the register, issue the -testregister command as follows:
> qaucli -pr nic -testregister [cna_port_inst]
-trans
(Transceiver Monitoring Interface [DMI])
To display transceiver diagnostics monitoring interface (DMI) data, issue the
-trans command as follows:
> qaucli -pr nic -trans [cna_port_inst]
-updimages
(Flash Update)
To update the Flash (boot and firmware) images, issue the -updimages
command as follows:
> qaucli -pr nic -updimages [cna_port_inst] <image_file>
For example:
> qaucli -pr nic -updimages 1 "c:\my dir\valid-image-file"
netscli -updimages c:\temp\temp1
Loading: 1. CNA ...
Loading: 1. CNA Port index : 1 ...
Loading: 1. CNA Port index : 2 ...
=== Updating images for 1. CNA Port Index ===
Loading, please wait ...
Successfully updated Flash (Boot & Firmware images) for 1. Port
Index from file: c:\temp\temp1
=== Updating images for 2. CNA Port Index ===
Loading, please wait ...
Successfully updated Flash (Boot & Firmware images) for 2. Port
Index from file: c:\temp\temp1
-updimages_viewver
To view the Flash version, issue the -updimages_viewver command as
follows:
> qaucli -pr nic -updimages_viewver image_file