Qlogic 3200 Series User Manual - page 382
12–Setting Up NIC Partitioning (NPAR) Using Interactive Commands
Setting Up NIC Partitions
12-4
SN0054667-00 G
4.
From the NIC Partitioning
option 1: NPAR Configuration to display the NPAR Configuration
menu, which provides the following options:
1: Bandwidth Configuration
2: Change PCI Function Personality
5.
Configure the bandwidth settings to meet your system requirements. For
example, to change the bandwidth of the function 1 NIC partition:
a.
Select option 1: Bandwidth Configuration
b.
Select option 1: Function:1
c.
Select option 1: Modify Minimum Bandwidth (
Figure 12-5. Selecting to Modify Minimum Bandwidth
d.
At the prompt, enter the percent value of bandwidth you want
committed to the selected function.
e.
Enter the percent value of bandwidth to which you want to limit the
selected function.