Qlogic 3200 Series User Manual - Command Summary
5–NIC Noninteractive Commands
Command Summary
SN0054667-00 G
5-3
Command Summary
This section lists each command line option in alphabetic order, and provides a
description of each and example of most.
-beacon
To toggle on and off the port beacon (LED), issue the -beacon command as
follows:
> qaucli -pr nic -beacon [cna_port_inst]
For example:
> qaucli -pr nic -beacon 2 on
Loading: 1. CNA . . .
Loading: 1. CNA Port index : 1 ...
Loading: 1. CNA Port index : 2 ...
Successfully set Beacon to: Enabled
-c
(NIC Port Setting Configuration)
To view the adapter port configuration, issue the -c command as follows:
> qaucli -pr nic -c [cna_port_inst]
For example:
> qaucli -pr nic -c 1
=== Displaying CNA Port config info for 1. CNA Port Index ===
Port_Alias : None
Port_Physical_MAC_Alias : john
Port_LLA_MAC_Alias : paul
-cardreset
To activate changes made to the Flash, issue the -cardreset command as
follows:
> qaucli -pr nic -cardreset [cna_port_inst]
NOTE
A parenthetical phrase after a command indicates the equivalent interactive
menu option. For example, -c
(NIC Port Setting Configuration)
indicates
that the -c command has an equivalent NIC Port Setting Configuration
menu option described in
Chapter
.
Not all noninteractive commands have equivalent interactive menu options.