Qlogic 3200 Series User Manual - -Teamlist
5–NIC Noninteractive Commands
-teamlist (Display Teams List)
5-16
SN0054667-00 G
VLAN Enabled : Disabled
VLAN ID : None
MAC Address : 00:c0:dd:0a:b1:a9
MTU : 1500
IPv4 Address : 169.254.27.115
Subnet Mask : 255.255.0.0
IPv6 Address : fe80::2c0:ddff:fe0a:b1a9
Link Status : Unknown
-teamlist
(Display Teams List)
To view a list of all previously configured teams (if any), issue the -teamlist
command as follows:
> qaucli -pr nic -teamlist
For example:
> qaucli -pr nic -teamlist
Using config file: .\netscli.cfg
Loading: 1. CNA ...
Loading: 1. CNA Port index : 1 ...
Loading: 1. CNA Port index : 2 ...
Team: 1 Team Description: QLogic VT-IM Miniport Driver #2 VLAN ID: None
Team Type: Fail Over
Team Members:
CNA: 1 CNA Port: 1 MAC: 00:c0:dd:0a:b1:a8 Description: QLogic 10Gb PCI
Ethernet Adapter
CNA: 1 CNA Port: 2 MAC: 00:c0:dd:0a:b1:a9 Description: QLogic 10Gb PCI
Ethernet Adapter #2
-teamnew
(Configure New Team)
To configure a new team, issue the -teamnew command as follows:
> qaucli -pr nic -teamnew <team_type> <port_insts|ALL>
Where team_type specifies a numeric value and port_insts specifies a list
of comma-separated port indices (for example 1,2).