Oce VarioPrint 5000 Operating Manual - 5.3 Paper Specifications
5.3 Paper specifications
A29246-X17-X-4-7680 / do501.fm
91
5.3 Paper specifications
This section contains information on the following topics:
5.3.1 General information >>> page 91
5.3.2 Paper types >>> page 92
5.3.3 Climate and paper >>> page 92
5.3.4 Paper handling >>> page 92
5.3.1 General information
To ensure maximum system availability, the paper must comply with the paper
specifications for cut sheet printing systems (see section 1.6 Other documents, page
12)and be stored in an environment with suitable ambient conditions.
Non-compliance with the paper specifications can cause damage to the printing system and
may also result in the release of substances from the paper which can contaminate the
environment or have a detrimental effect on health. Océ Printing Systems GmbH accepts
no liability for such damages.
When using chemically treated paper, observe the maker’s directives on safety.
The printing system is designed to process a wide range of paper types. However, the
operational properties of the printing system and the print quality also depend on factors
such as:
• Paper quality
• Grammage
• Moisture content
• Dimensional stability
• Smoothness
• Flatness/undulation
• Quality of cut, etc.
Before using new media, ensure they comply with the paper specification. In case of doubt,
contact the paper lab:
OPS SWS 42
P.O. box 1260
85581 Poing