Oce VarioPrint 5000 Operating Manual - page 308
8.3.2.4 Clearing a paper jam in the paper input, cascade or Interposer
298
A29246-X17-X-4-7680 / do805.fm
8.3.2.4 Clearing a paper jam in the paper input, cascade or Interposer
Paper jam in the flaps
Paper jam in the input trays
Proceed as follows:
1.
Close all input trays.
2.
Open the right door.
3.
Pull the release knob of the flap specified in the error message and in the operator
panel and affix in position in the top notch. The release knob must be flush with the
plate.
4.
Maneuver the jammed paper into a better position for removal by turning the
unnumbered green knobs.
Caution
Sharp paper edges can cause cuts.
Do not slide hands or fingers along the edges.
5.
Remove jammed paper.
6.
Close all flaps again. Affix the release knobs in the notches indicated in green. The
release knobs must be flush with the plate.
7.
Close the right door.
8.
Press
Proceed as follows:
1.
Close all input trays.
2.
Open the right door.