Oce VarioPrint 5000 Operating Manual - page 173
Other manuals for VarioPrint 5000:
Operating Manual
of
360
6.3.1 Cleaning output trays
A29246-X17-X-4-7680 / do601.fm
163
Output trays
Both output trays must be cleaned.
Proceed as follows:
1.
Press the key on the output tray. The
stacker platform is lowered.
Caution
If you pull out the output tray too sharply and quickly, you could pull it beyond its stop
point, causing it to drop to the floor. There is a danger of injury to you and of damage
to the output tray.
Always slide the output tray slowly and evenly to its stop point on the guide rail
(reference speed max. 0.5 m/s).
2.
When the stacker platform has
stopped moving pull up the handle to
release the output tray and pull the tray
slowly and evenly out of the printer.