Oce VarioPrint 5000 Operating Manual - page 205

6.4.5 Cleaning the printing system generally

A29246-X17-X-4-7680 / do601.fm

195

6.4.5 Cleaning the printing system generally

Caution

Danger from dust explosion.

There can be a high build-up of static charge when draining toner and developer spill. 

For draining large quantities of spill (1 kg and more), an explosion-proof industrial 

vacuum cleaner must be used.

Proceed as follows:

1.

Vacuum-clean the floor around the printing system.

Important

Fluid can seep inside the printing system. This could cause irreparable damage 

to the electrical and mechanical components.

Do not place cleaning fluids on top of or in the immediate vicinity of the printing 

system and take care to prevent fluids entering the printing system.

2.

Cleaning the housing surfaces:

• Add some mild household detergent to water and dip a soft cloth into the 

solution.

• Wring out the cloth well. Use it to wipe off the surface of the housing.