Oce VarioPrint 5000 Operating Manual - page 285
7.3.10 Replace photoconductor drum
A29246-X17-X-4-7680 / do701.fm
275
Insert the photoconductor drum
16.
Grip the upper rim of the
photoconductor drum with your
fingers, and pull it out some of the way
together with the protective cover.
17.
Grasp the photoconductor drum inside
with your open hand, pull it swiftly out
of the printer together with the
protective cover, and place in the old
carton.
Caution
The old photoconductor drum must be disposed of as hazardous waste.
Store the old drum and any flakes of coating in the original carton, and keep ready
for collection by service or the contracted shipping company.
Proceed as follows:
1.
Carefully remove the new photoconductor drum, together with the protective cover,
from its packaging.
Caution
The surface of the photoconductor drum is very sensitive and can
be easily damaged.
Avoid direct sunlight and any contact.
Proceed as follows: