Oce VarioPrint 5000 Operating Manual - page 88
4.3.4.1 Calling up and operating the Job wizard.
78
A29246-X17-X-4-7680 / do405.fm
• Apply settings >>> page 77
Load setup
The Setup dialog is the first dialog that appears after calling up the Job wizard. If you do not
want to load a setup, click Next to go to the next dialog.
Save settings in the setup
You can save the settings that you made with the Job wizard in a new setup. The
associated menu appears as the final dialog in the Job wizard:
Proceed as follows:
1.
Click on the "Display available setups" checkbox.
2.
Select the appropriate setup name from the "Available setups" list.
3.
Click on
.
The print parameters saved in the selected setup are loaded into the wizard.
Proceed as follows:
1.
Click on the "Create new setup" checkbox.
2.
Enter a new name in the input field.