Oce VarioPrint 5000 Operating Manual - page 338
8.4.3.6 Ghost image
328
A29246-X17-X-4-7680 / do805.fm
8.4.3.6 Ghost image
8.4.3.7 Streaked coloring
Cause
Correction
See section
Cleaning corotron soiled
Clean wire
6.5 Cleaning corotron
wires if an error occurs
>>> page 196
Luminescentstrips in the charge
station soiled
(memory)
Clean luminescentstrips in the
charge station
6.3.3 Cleaning the
charge station >>>
page 168
Edge of cleaning blade (cleaning)
faulty
Turn cleaning blade (cleaning) or
replace
7.3.1 Replacing or
turning the cleaning
blade (cleaning) >>>
page 227
Photoconductor drum damaged
Possibly replace photoconductor
drum
7.3.10 Replace
photoconductor drum
>>> page 270
Fuser oil container empty (offset
in 157 mm intervals on the paper)
Replacing the fuser oil container
7.2.4 Replacing the
fuser oil container >>>
page 220
Paper damp and undulating
Store the paper as directed
Insert new paper
1.6 Other documents
>>> page 12
5.4 Refilling paper >>>
page 93
Paper damaged
Insert new paper
5.4 Refilling paper >>>
page 93
Cause
Correction
See section
Charge and discharge corotrons
soiled
Clean wires
6.5 Cleaning corotron
wires if an error occurs
>>> page 196
Replace corotron cartridges
7.3.8 Replacing the
charge/discharge
corotron cartridges >>>
page 264
Transfer blade soiled
Clean transfer blade
6.3.4 Cleaning the
transfer station >>>
page 170