Oce VarioPrint 5000 Operating Manual - page 324
8.3.3 Setting the decurler
314
A29246-X17-X-4-7680 / do805.fm
8.3.3 Setting the decurler
Curling of the paper can impair paper transport and stacking performance. Decurlers
remove these troublesome curls.
The upper and lower print units each have a decurler.
A test for each type of paper must be run in order to determine the correct decurler settings.
The decurler settings for the test print are listed in the following table.
8.3.3.1 Print test pages
Print mode
Decurler settings for test print
Lower print unit
Upper print unit
Fast Simplex
0
0
Duplex
-1
+1
CustomTone Simplex
+1
0
CustomTone Duplex
+1
0
Proceed as follows:
1.
Press the
2.
On the operator panel, select the parameters> 3. In the "Output direction" field select: "Front page down". Press the 4. Open the center doors. 5. Select the values for the decurler settings from the above table for the appropriate print mode.