Oce VarioPrint 5000 Operating Manual - page 138

5.9.2.1 Removing fuser station

128

A29246-X17-X-4-7680 / do501.fm

6.

Removing the upper fuser station:

• Push foot pedal down, and 

simultaneously, using the handle, 

push the elevating platform down 

until the top edge of the tray is on the 

elevating platform under the 

developer station.

7.

Removing the lower fuser station:

• Push foot pedal down, and simultaneously, using the handle, push the elevating 

platform fully down.

Important

Possibility of damage to the trolley and fuser station from the tray on the elevating 

platform when the platform is raised.

Always proceed exactly as stated in the instructions below!

Proceed as follows: