Oce VarioPrint 5000 Operating Manual - page 328
Other manuals for VarioPrint 5000:
Operating Manual
of
360
8.3.3.2 Optimizing decurler settings
318
A29246-X17-X-4-7680 / do805.fm
Proceed as follows:
1.
Press the
2.
Open the center doors.
3.
Decurler on lower print unit:
Pull the knob towards you and turn it
one increment in the minus or plus
direction (see following table)
depending on the curl determined.
Then return knob to position.
4.
Decurler on upper print unit:
Pull the knob towards you and turn it
one increment in the minus or plus
direction (see following table)
depending on the curl determined.
Then return knob to position.
5.
Close the center doors,
6.
Press
7.
Print some paper with the changed decurler settings. You might need to make further
adjustments to the decurler settings and print again.