Oce VarioPrint 5000 Operating Manual - page 32
2.6.2 Operation
22
A29246-X17-X-4-7680 / all203.fm
Service
Service staff are specialized Océ personnel who carry out all work that operators do not
have the permission to, on and with the printing system. (e. g., any work on the power cir-
cuits in the printing system).
2.6.2 Operation
Observe the following instructions when using the printing system:
2.6.2.1 Operator >>> page 22
2.6.2.2 Safety covers >>> page 23
2.6.2.3 Assemblies >>> page 23
2.6.2.4 Cleaning >>> page 24
2.6.2.5 Foreign bodies, noises >>> page 24
2.6.2.6 Cooling, heat >>> page 24
2.6.2.7 Consumables and expendables >>> page 25
2.6.2.8 Optical wave guide >>> page 25
2.6.2.9 Laser >>> page 25
2.6.2.10 Remote control via LAN >>> page 25
2.6.2.1 Operator
• Only operators, key operators and service personnel may use the printing system.
• The printing system must not be operated by persons under the influence of alcohol or
drugs, or by persons taking medication such as psychotropic drugs.
• Before operating the printing system, carefully read through the documentation. If you do
not understand something in the documentation, please ask (e.g. ask service).
• Observe all warning and information signs both on and in the printing system (see section
2.5 Warning and Information signs, page 19).
• In case of emergency, immediately turn off the printing system (location of the main circuit
breaker see section 3.2.3 Internal view, page 33). In the event of damage to the housing,
power cable or operating controls, or penetration of fluids or foreign bodies, call the ap-
propriate service representative.