Oce VarioPrint 5000 Operating Manual - page 129
5.8 Power off the printing system
A29246-X17-X-4-7680 / do501.fm
119
5.8 Power off the printing system
Proceed as follows:
1.
At the operator panel in the
clutch symbol to
for channel A, channel B, or channel C, and confirm query
with
2.
Click the
button and confirm the query with
3.
If the printing system is likely to be inactive for some time (over two hours), remove
the paper from all the input trays(see section 5.4 Refilling paper, page 93).
4.
Pack paper in the original packaging. This ensures the room climate does not
change the running properties of the paper before it is used again.
5.
Press
6.
Only if the printing system is also to be
detached from the line power supply:
Open the center right door.
Turn the main power switch to the "0"
position.
7.
Close the door.
0