Oce VarioPrint 5000 Operating Manual - page 272
Other manuals for VarioPrint 5000:
Operating Manual
of
360
7.3.7 Turning or replacing the cleaning blade (transfer)
262
A29246-X17-X-4-7680 / do701.fm
Install cleaning blade (transfer)
Proceed as follows:
1.
The four edges of the cleaning blade
(transfer) are numbered "1", "2", "3"
and "4". These are used one after the
other.
• New cleaning blade:
Insert the cleaning blade into the
casing so that the edge marked "1" is
at the top and faces the casing.
• Turning the cleaning blade:
Insert the cleaning blade so that the
other edges "2", "3" and "4" are
successively at the top and facing
the casing.
Insert the cleaning blade so that it lies
firmly in the groove below.
2.
Hold by the recessed grip, push the
tension blade to the left and tighten the
two knurled screws.