Oce VarioPrint 5000 Operating Manual - page 315

8.3.2.6 Clearing a paper jam in the transfer station

A29246-X17-X-4-7680 / do805.fm

305

If the paper has not been separated from the photo conductor drum, you may also have to 

remove the cleaning station to reach the jammed paper.

4.

Take hold of the transfer station by the 

rotary knob and push in.

Rotate the knob to the right until it 

engages.

Proceed as follows:

1.

Open the center doors

Caution

If you pull out the cleaning station too sharply and quickly, you could pull it beyond 

its stop point causing it to drop to the floor. There is a danger of injury to you and of 

damage to the cleaning station.

Always slide the cleaning station slowly and evenly to its stop point on the guide rail 

(reference speed max. 0.5 m/s).

2.

Lift up the handle and pull the cleaning 

station slowly and evenly out of the 

system.

Proceed as follows: