Oce VarioPrint 5000 Operating Manual - page 192

6.4.1 Cleaning the input trays

182

A29246-X17-X-4-7680 / do601.fm

3.

Take hold of the input tray by its 

recessed grip and pull out slowly until 

it stops.

Caution

Sharp paper edges can cause cuts.

Do not slide hands or fingers along the edges.

4.

Remove the rest of the paper from the input tray.

5.

Vacuum inside the input trays.

6.

Put paper back into the input tray.

Important

Pushing in the input tray too sharply and quickly can move the stack of paper. This 

can cause feed problems.

Push in the input tray slowly.

Proceed as follows: