Oce VarioPrint 5000 Operating Manual - page 167

5.9.6 Calculation and input of shrinkage compensation

A29246-X17-X-4-7680 / do501.fm

157

Horizontal passer shift

Note

The measurements and settings must be carried out separately for leading and 

trailing edge.

Proceed as follows:

1.

Select the    menu at the operator 

panel.

2.

Select the tab .

3.

Select the page for which the setting needs to be done using the buttons in the 

"Switch page" area.

4.

Enter the passer shift into the input field in the "Horizontal passer shift" area. 

If the shift varies within a page, enter the average value.

5.

Click .

The print object that is printed with the upper print unit, is horizontally shifted by the 

entered value.