Oce VarioPrint 5000 Operating Manual - page 33
2.6.2.2 Safety covers
A29246-X17-X-4-7680 / all203.fm
23
• Do not work with unprotected long hair or wear loosely hanging items of clothing (e. g.
ties, sleeves, scarves et. c.), or jewelry such as necklaces, bracelets and rings. since
these can cause injury if caught in drive mechanisms.
2.6.2.2 Safety covers
• Do not attempt to remove safety covers yourself; do not manipulate safety equipment
such as the switches monitoring the safety covers, and do not perform any work not in-
tended to be performed by operators. Such action can cause accidents and may also
damage the printing system.
• Safe operation of the printing system is guaranteed only when the outer paneling is fully
mounted. Only if the paneling is affixed correctly and completely are you assured protec-
tion against:
– Electrical shocks
– Injury from mechanical parts, e. g. cuts, drawing in, crushing
– The spread of fire
– Insufficient cooling of the printing system
• Keep all doors, trims, flaps and covers closed while the printing system is in operation.
This ensures that limit values for radio interference suppression are not exceeded. The
noise emission is also minimized.
2.6.2.3 Assemblies
When Removing
• the Developer Station
• the Fuser Station
• the Transfer Station
• the Cleaning Station
• the Input Trays
• the Output Trays
always slide slowly and evenly to its stop point on the guide rail (reference speed max. 0,5
m/s).