Oce VarioPrint 5000 Operating Manual - page 182
Other manuals for VarioPrint 5000:
Operating Manual
of
360
6.3.4 Cleaning the transfer station
172
A29246-X17-X-4-7680 / do601.fm
6.
Push the support back into the guide
notch as follows:
There is a spring catch in the front area
of the guide notch. Press the black
front section of the support against the
guide notch to surmount the spring
force. Then push the support in until it
engages.
7.
Cleaning the toner mark sensor.
Caution
You could trap your fingers when lowering the transport belt unit.
Ensure that your hands cannot be trapped when lowering the transport belt unit.
8.
Release transport belt unit and lower.
Proceed as follows: