Oce VarioPrint 5000 Operating Manual - page 283
Other manuals for VarioPrint 5000:
Operating Manual
of
360
7.3.10 Replace photoconductor drum
A29246-X17-X-4-7680 / do701.fm
273
Caution
If removed too quickly and suddenly, the developer station can be pulled out beyond
the stops and fall down. There is a danger of injury to you and of damage to the
developer station.
Always slide the developer station slowly and evenly to its stop point on the guide rail
(reference speed max. 0.5 m/s).
11.
Raise the handle and pull out the
developer station slowly and evenly.
12.
Hook the retaining plate over the upper
bolt.
Caution
Possibility of scraping skin on sharp edges of the flange shafts.
Do not touch the flange shafts.
Proceed as follows: