Oce VarioPrint 5000 Operating Manual - page 259
Other manuals for VarioPrint 5000:
Operating Manual
of
360
7.3.5 Replacing the cleaning kit
A29246-X17-X-4-7680 / do701.fm
249
6.
Press the catches on both sides
towards the plate to release them.
Draw the cleaning unit up and out and
put to one side, with the cleaning kit
facing up.
Caution
Possibility of burns from hot cleaning kit.
Use an insulating cloth to handle the cleaning kit.
7.
Pull forwards the rear catch on the left
side of the lower band roll until it
engages. The centering pin in the
band roll is released.
Remove the roll.
8.
Press the lever on the left of the upper
band roll.
Remove the roll.
Proceed as follows: