Oce VarioPrint 5000 Operating Manual - page 106
5.5 Removing paper from the output tray
96
A29246-X17-X-4-7680 / do501.fm
5.5 Removing paper from the output tray
If the warning "Output tray X full" is displayed, the paper can be removed during printing.
If the error message "Output tray X full" is displayed, the printing system stops and the
output tray moves down automatically.
Proceed as follows:
1.
Press
2.
Press the key on the output tray.
The stacker platform is lowered.
Caution
If you pull out the output tray too sharply and quickly, you could pull it beyond its stop
point, causing it to drop to the floor. There is a danger of injury to you and of damage
to the output tray.
Always slide the output tray slowly and evenly to its stop point on the guide rail
(reference speed max. 0.5 m/s).