Oce VarioPrint 5000 Operating Manual - 5.9 Printing With Two Colors

5.9 Printing with Two Colors

120

A29246-X17-X-4-7680 / do501.fm

5.9 Printing with Two Colors

With printing systems with the Océ CustomTone

®

 option, you can print with two colors. 

You can also use MICR QCDS (Quick Change Developer Station).

For equipping the print units, the following combinations are permitted.

Before printing, check to ensure that the proper stations have been installed. If not, replace 

the corresponding stations using a special trolley for that purpose. 

This section contains information on the following topics:

5.9.1 Preparing the Trolley >>> page 121

5.9.2 Replacing fuser station >>> page 126

5.9.3 Replace developer station >>> page 139

5.9.4 Menu settings for color printing >>> page 152

5.9.5 Automatic menu settings when using MICR >>> page 152

Important

Note when using MICR

When using MICR, the developer station and the fuser station must be MICR-

compatible.

The upper and lower fuser stations must always be the same type. This means that 

when you want to print using MICR, both fuser stations must be MICR-compatible 

(type A1).

Lower print unit

Upper print unit

Valid print mode

Black

Black

Monochrome auto mode

Black

Color

CustomTone Automode; 

Duplex

MICR

Black

Duplex

MICR

Color

CustomTone Automode; 

Duplex

MICR

MICR

Monochrome auto mode

Color

Black

CustomTone Automode; 

Duplex

Black

MICR

Duplex

Color

MICR

CustomTone Automode; 

Duplex