Oce VarioPrint 5000 Operating Manual - page 258

7.3.5 Replacing the cleaning kit

248

A29246-X17-X-4-7680 / do701.fm

4.

Rotate the knob to the left until it 

engages. 

Take hold of the fuser station and pull 

it towards you slowly and evenly.

Caution

The components in the fuser station reach a surface temperature of approximately 

230 

o

C during operation. If you touch them, you may burn yourself.

Before beginning work, open the fuser station and allow the printing system to cool 

for approx.1/2 hour.

5.

Take hold of the cover plate by its 

handle and lift it off.

Proceed as follows: