Oce VarioPrint 5000 Operating Manual - page 150
Other manuals for VarioPrint 5000:
Operating Manual
of
360
5.9.3.1 Remove developer station
140
A29246-X17-X-4-7680 / do501.fm
5.9.3.1 Remove developer station
Proceed as follows:
1.
Press the
2.
Open the center doors.
Caution
If removed too quickly and suddenly, the developer station can be pulled out beyond
the stops and fall down. There is a danger of injury to you and of damage to the
developer station.
Always slide the developer station slowly and evenly to its stop point on the guide rail
(reference speed max. 0.5 m/s).
3.
Raise the handle and pull out the
developer station slowly and evenly.
4.
Release the trolley brake. To do this,
press the upper part of the trolley
brake on the two rear wheels.
5.
Push the empty trolley in front of the developer station.