Oce VarioPrint 5000 Operating Manual - page 293
Other manuals for VarioPrint 5000:
Operating Manual
of
360
7.3.12 Replacing paddles
A29246-X17-X-4-7680 / do701.fm
283
5.
Set the down pressure to –1. To do
this, turn the wheel until the required
value is visible in the window.
Caution
If you pull out the output tray too sharply and quickly, you could pull it beyond its stop
point, causing it to drop to the floor. There is a danger of injury to you and of damage
to the output tray.
Always slide the output tray slowly and evenly to its stop point on the guide rail
(reference speed max. 0.5 m/s).
6.
Pull up the handle to release the output
tray, and pull the tray slowly and
evenly out of the printer.
Proceed as follows: