Oce VarioPrint 5000 Operating Manual - page 116
5.6.3 Configuring the output tray
106
A29246-X17-X-4-7680 / do501.fm
5.6.3 Configuring the output tray
5.6.4 Setting the fusing temperature
The fusing temperature depends on a number of factors, but the chief ones are the paper
grammage, surface finish and moisture content.
Set the temperature in the temperature> menu. Proceed as follows: 1. Removing paper from the output tray, (see section 5.5 Removing paper from the output tray, page 96, steps 1 to 7). 2. Open the left door. 3. Move the bar on the desired output tray until the appropriate position for the paper width is reached. 4. Close the door. 5. Press the Paper quality / errors Setting Heavy paper > 120 g/m 2 Moisture content > 40% rel. humidity Rough surface Normal (0) Light paper < 70 g/m 2 Moisture content < 40% rel. humidity Paper fails to separate from the fuser roller Normal (0)